9.4 C
New York
Sunday, December 3, 2023

Buy now


What to Do If Your iPhone Won’t Turn On Or is Stuck on a Black Screen

If your iPhone won’t turn on or is stuck on a black screen, there are a few things you can try. To force restart, press the power button and hold it until the Apple logo appears. If this does not work, contact to the Apple support.


When your iPhone is stuck on a black screen and won’t turn on, it may be because of a total battery drain. In this case, it’s a good idea to plug it into a wall charger for at least 30 minutes, preferably using the original charger. However, if you have to use an alternative charger, you should check its compatibility with the iPhone model. If all else fails, force restart the phone while connected to a charger.

If the black screen on your iPhone is caused by an outdated iOS version, you can update the OS. To do this, unlock your phone and go to Settings > General > Software Update. Next, tap on the ‘Update & Download’ or ‘Install Now’ button. Be sure to charge your phone to a minimum of 60% before updating it.

Some hardware problems may also cause the screen to go black. If the iPhone has been dropped, it could damage internal components or the LCD screen. Overheating can also cause the connection between the screen and the processor to break down. Although rare, you should seek assistance from a technician if you suspect a hardware problem.

Checking hardware

If your iPhone is stuck on the black screen or won’t turn on at all, you may be experiencing a hardware problem. There are many things to look for in order to determine whether your phone is at fault. You can start by checking for cracks in the screen or liquid spills. You should also check the LCI (Lightning connector) to make sure it’s intact. If all else fails, you may want to contact Apple Support to get it fixed.

Broken screens can cause a black screen to appear on your iPhone. If you have a cracked screen, your iPhone may not turn on at all. It might be stuck on the black screen and not respond to a hard reset. Additionally, your iPhone may be unable to charge. These problems can also be caused by water damage or improper handling of the phone. You should remember that the iPhone is extremely sensitive and should be handled carefully to prevent damage to the screen. Any drops should be avoided as this can cause internal components to shift, which may affect the display.

If the problem persists, try a forced restart. Sometimes, a software or firmware issue is causing the problem. In such a case, you should try to reset the device by holding the side button and the volume down button. Then, follow the instructions that appear onscreen to fix the problem.

Force restarting

If your iPhone won’t turn on or is stuck on a black screen, force restarting the device may be the best solution. Sometimes, software or firmware problems cause an iPhone to have issues. For example, an application can go rogue and cause the device to have system errors. If the battery is too low, you can wait until the firmware helps the device recharge.

Force restarting an iPhone doesn’t destroy the data on the device. The memory unit remains intact, so the data on your device will remain safe. However, if the iPhone OS is severely corrupted, you will have to use the Prefix method or iTunes to reload the operating system. Other causes of iPhone problems include troublesome apps or a weak internet connection. To fix these problems, you can try to uninstall the app or update it.

The most common reason for an iPhone’s black screen is a hardware issue on the inside. If the device has been dropped, the LCD cable could have been damaged. The LCD cable is fairly simple to replace, but it’s also a relatively expensive process. Water damage can also cause an iPhone to go black.

Getting support from Apple

If your iPhone won’t turn on or is stuck on a black screen, you have many options to get it fixed. The first thing to do is to plug your phone into a power source. You should see a charging icon appear on the screen. If the charging icon isn’t there, try pressing the power button on your iPhone several times.

Another option for fixing your iPhone is to force restart it. This will shut down all ongoing processes and re-initialize the system. It will also erase your data. Then, you can try to restore the phone’s factory settings. You should use a compatible charger when restoring the phone.

If you are unable to fix the problem on your own, you can get support from Apple. If the problem is caused by a software update, you can follow troubleshooting steps to fix the problem. If the problem is caused by a hardware issue, you should consult a repair technician. You can also try using an iOS system recovery software, such as FoneDog.

Related Articles


Please enter your comment!
Please enter your name here

Stay Connected

- Advertisement -spot_img

Latest Articles